Pitless Weighbridge

Pitless Weighbridge

HMT Pitless Weighbridge are manufactured from IS: 2062 structural steel which form a fully welded structure to provide high rigidity. Mild steel plate is welded on it to complete the structure. It is most suitable where exaction is difficult or pit construction is costly.

    Advantages
  • 40% lower civil construction cost

  • Maintenance is easy as all electronics components and weighbridge structure are accessible above ground level.

  • No need for Guiding Girders

  • Main i-beams acts as guiding girders

  • Problem of Pit maintenance is eliminated.

  • Less complex foundation requirement

  • Fewer problems with water drainage

  • Accessibility to the weighing component is easier
    Disadvantages
  • Requires large area to install.
  • Requires loading & unloading Ramps.


Sr. No Model Platform size Capacity Load Cell
01 HWC 703 7000 x 3000 mm² 30/40 Ton 4
02 HWC 753 7500 X 3000 mm² 40/50 Ton 4
03. HWC 903 9000 X 3000 mm² 40/50 Ton 4
04. HWC 123 12000 X 3000 mm² 50/60/80 Ton 4/6
05. HWC 163 16000 X 3000 mm² 60/80/100 Ton 6/8
06. HWC 183 18000 X 3000 mm² 80/100 Ton 6/8
07. HWC 1835 18000 X 3500 mm² 80/100 Ton 6/8
08. HWC 213 21000 x 3000 mm² 100/120/150 Ton 8/10
09. HWC 2135 21000 X 3500 mm² 100/120/150 Ton 8/10
10. HWC 204 20000 X 4000mm² 100/150/200 Ton 8/10
11. HWC 244 24000 x 4000mm² 150/200 Ton 10/12